The Flash 9.0.0 plugin or higher is required to view content on this page, but was not detected on your browser.
Prototype: Make a laser on a tripod with the laser facing down. It scans an area below it with a class 3b laser (like a pen laser). This scan works like a CRT in that it fires a single beam to the top left of the scan area and moves to the right side, drops down and scans right to left and so on until it reaches the bottom where it reverses and scans back up. A sensor reads the distance from the laser to the topography being scanned and produces a 3D computer image in a CAD program. Scan all six sides from three angles each and create a perfect reproduction of the objects volume in 3D space wire frame. Let another sensor (probably a CCD) read the color, illumination, contrast etc, and let the computer apply this information to the wire frame 3D object scanned with the laser like paint.
Finished product: Removing the tripod and holding the 3D camera like a camera, scan any object in range and copy its exact dimensions. My thoughts were to use this to quickly add 3D content to 3D based games to avoid the creation process used today or if you needed a manufacturer to make a copy of something, you could scan it and e-mail the info very quickly.